Electrochemistry

• 12 cm long pH probe
• Big and clear LCD provide real time pH and Temp. Display
• IP 65 water proof
• Measuring stability indicator
• One touch auto-calibration up to 3 points
• Calibration values are adjustable
• 20 mins auto power off
• Simple sleep mode disable operation
• Data hold function
• Battery low indicator
• Temperature unit selectable
• Storage bottle to keep sensor wet & last life time

• Large display screen- displays pH and temperature at the same time
• 1, 2 or 3 point calibration, with automatic buffer recognition of US and NIST buffer sets.
• Readings are automatically compensated for temperature (ATC)
• Electrode efficiency display
• Replaceable electrode module ensures extended usefulness
• IP 67 water-tight housing
• Auto Power off after 10 minutes of inactivity
• Battery life over 200 hours

• Simultaneous displays pH or mV and temperature
• Convenient calibration with automatic buffer recognition of European and US buffer sets
• Calibration data is stored in memory and is ready for use on power up
• Automatic or manual temperature compensation
• Automatic lock mode and end point sensing are availbale to lock in stable readings
• 50 data set reviewable memoryAutomatic shut off function (30 minutes of non-use)
• Battery life 1000 hours
• Low battery indicator
• IP65 waterproof case

• LCD display with backlight showing pH / ORP and temperature readings
• Up to 5 point calibration for pH and one point calibration for and ORP
• Automatic buffer recognition (NIST and USA)
• Automatic or manual temperature compensation
• Bluetooth function to connect to tablets
  App name BOECO E-Chem BT-700 (App Store / Googleplay)
• When the unit is connected to a bluetooth device, the user can store data into the device that meets GLP requirements
• AC adaptor or battery power (low battery indicator)

The BT-700 will be delivered incl. the following standard accessories:
1 x ATC probe, each 1 x 500 ml Buffer solution pH 4,01, pH 7,00
1 x AC adaptor,
1 x operating Manual,
1 x flexible electrode holder.
6 x 1,5 V AAA batteries

• Simultaneous display of dissolved oxygen and temperature measurements
• Automatic temperature compensated (ATC) dissolved oxygen readings
• User selectable salinity and pressure compensated dissolved oxygen readings
• Works with accurate and reliable galvanic dissolved oxygen probes
• 50 data set reviewable memory
• Automatic shut off function (30 minutes of non-use)
• Battery life approx 200-500 hours
• Low battery indicator
• IP65 waterproof case

The DO-580 will be delivered incl. the following standard accessories:
1 x Watertight dissolved oxygen probe LD-900G-1,
1 x 30 ml Galvanic O2 Fill Solution,
1 x 9 V battery,
1 x Operating manual,
1 x carrying case

• Simultaneous displays conductivity, salinity or TDS with temperature measurementsConvenient one point calibrattion.
• Calibration data is stored in memory and is ready for use on power up
• Adjustable TDS coefficient, reference temperature and temperature coefficient
• Uses one conductivity cell for conductivity, salinity and TDS measurement
• Accepts 4-wire conductivity cells with k=0,475 cell constant for imroved flexibility and accuracy
• 50 data set reviewable memory
• Automatic shut off function (30 minutes of non-use)
• Battery life approx 200 -500 hours
• Low battery indicator
• IP65 waterproof case

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• Convenient one point calibration. Calibration data is stored in memory and is ready for use on power up.
• Adjustable TDS coefficient, reference temperature and temperature coefficient
• Uses one conductivity cell for conductivity, salinity and TDS measurement
• Accepts 4-wire conductivity cells with k=0,475 cell constant and 2-wire K=0,1 cell constant for improved flexibility and accuracy
• Low battery indicator
• IP54 waterproof case

The properties of the BOECO Multiparameter pH/ORP/Conductivity/TDS/Salinity/Resistivity/Temperature Bench Top Meter Model MBT-700

• LCD with backlight showing pH / ORP or Conductivity / TDS / Salinity and temperature readings
• Two channel measurement allows measuring ph/ORP and Conductivity/TDS/Salinity simultaneously
• Up to 5 point calibration for pH and one point calibration for conductivity
• Automatic or manual temperature compensation
• Automatic buffer recognition (NIST and USA)
• Bluetooth function to connect to tablets. APP Name: BOECO E-CHem MBT-700 (App Store / Googleplay)
• When the unit is connected to a bluetooth device, the user can store data into the device that meets GLP requirements.

The MBT-700 will be delivered incl. the following standard accessories:
1 x ATC probe,
each 1 x 500 ml Buffer solution pH 4,01, pH 7,00
1 x AC adaptor,
1 x operating manual,
1 x flexible electrode holder